To chime in as well ... I've used a X10SDV-TLN4F as my main illumos dev box for the past year with no problems. I used this same board to add X552/X557 support to the ixgbe driver last year. They're fine systems.
The only thing that's currently needed for this (and a plethora of other platforms) is enclosure management and SGPIO support in the AHCI driver if you want the locate/failure LEDs on any attached drive enclosure to work, such as on SMCI's SYS-5028D-TN4T system which has this board wired up to a SAS backplane. Not exactly a big thing, though, and of course SmartOS works just fine without it. /dale > On Apr 24, 2017, at 5:10 AM, Micky <[email protected]> wrote: > > Hi Alex, > > I have been running machines with similar X10SDV series boards for almost a > year now and they are running fine (both with Xeon D-1521 and D-1541). > > Major problem was with the ixgbe drivers but that was resolved early this > year. > > Make sure to completely disable power-saving features (see other threads) and > properly allocate cpu_limit and shares to the VMs otherwise the machine could > lock up. > > On Mon, Apr 24, 2017 at 1:48 PM, Alex Waite <[email protected]> wrote: > Hello Dave, > > I’ve just become the recipient of one of Supermicro’s newest boards, > the X10SDV-TLN4F. > > [...] > > The issues that I’ve encountered so far: > > 1. Had to disable both COM1 and SOL redirection because the boot up > process would hang on loading asy > Had to specify acpi-user-options=0x4 otherwise > setting 0x2 and acpi_disable=true meant that you could only get > one boot out of the system. Trying to do a warm boot results in > arandom hang during boot. Needs a proper power cycle > setting 0x8 causes a random hang at some point during boot up > Setting 0x4 works to get you past boot up, but the integrated i350 > Intel NICs only work for roughly 15 seconds > > [...] The board also comes with a dual-port Intel X552/X557-AT > 10GBASE-T integrated into the system on chip, which doesn’t show up > at all [...]. > > Sorry to resuscitate such an old thread, but I'm looking at buying one of > these boards (X10SDV-6C-TLN4F) for home use. I'm curious if you resolved your > ACPI and NIC issues and how (if at all) this board is working out for you, 2 > years on. > > I'm new to Illumos, but I've been following it for a few years now and am > finally upgrading my hardware at home, and figured this was a good time to > give it a real go. At work, OmniOS and SmartOS keep coming up in > conversations, but none of us have any experience with Illumos, so this is > also a first step, dipping my toe in, to see how it might fit into our > network. > > I'm interested in any and all (especially Illumos related) info or insight > you have to share. :-) > > ---Alex > > smartos-discuss | Archives | Modify Your Subscription
signature.asc
Description: Message signed with OpenPGP
------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
