200 feet should not be a problem ============================
10Base2, which is part of the IEEE 802.3 specification, has a distance limit of 606.8 feet - 185 meters - per segment. 10 Base5, 10-Mbps baseband Ethernet ... Network managers understand the 100 meter distance limitation of 10BASE-T and 100BASE-T Ethernet and make allowances for working within these limitations On 7/30/07, Mike Burgess <[EMAIL PROTECTED]> wrote: > > > > --- Jeffrey Kutz <[EMAIL PROTECTED]> wrote: > > > I would like to establish a data link between two locations about a > > quarter mile apart. At one of the locations I have to run a line about > > 200 feet to an antenna location on a rooftop about 20 feet above ground. > > Attach your AP directly to the DISH with a coupler, and power over > ethernet. > Not sure how to get ethernet 200feet. > > Have you looked into ZigBee ? Edison will be using it to read electric > meters in a couple of years > http://en.wikipedia.org/wiki/Zigbee > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SOCALWUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SOCALWUG SOCALWUG website: http://www.socalwug.org -~----------~----~----~----~------~----~------~--~---
