In message <[EMAIL PROTECTED]>, Mike Tancsa writes: > > Using the same flash which has this 60 second delay, I took it and > put it in another box that has the 1.33 BIOS. It boots up as > expected. However, some other problems... The first time it powered > up, it was stuck on the red error light. I had heard reports from > some of field techs that this has been happening as well on other > units so I am not sure if its related or how common. If I do a > quick power cycle on it, it will come up no problem. If I unplug it, > let it sit for 5min and power it up, same problem. But a quick > power cycle after the initial one and all is OK.
Hi! Please look at this support document: http://www.soekris.com/issue0005.htm If you can reproduce the issue described on this document you can either return the board to Soekris Engineering (USA) or to Cortex Systems (Denmark) to have the board fixed, or try to solder the capacitor yourself if you have the required soldering skills and tools. Only a few boards from the first batchs have this problem. I sent my board to Cortex Systems (I am European citizen) and I am glad to say that they did a superb work; the staff at Cortex Systems did the best soldering work I know and returned the board very fast. No problems at all right now with this unit. I suppose that you may be interested in sending it to Soekris, as you currently have another board to be fixed and Mr. Kristensen is interested in looking at the problem you have with the CF card. Cheers, Igor. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
