Damn hotkeys... wasn't done but I hit ctrl-enter by mistake. Failing boxes:
SN: 161145 SN: 161146 SN: 161147 SN: 161148 SN: 161149 SN: 161150 SN: 161152 SN: 161153 SN: 161154 SN: 161155 SN: 161160 SN: 161161 SN: 161162 SN: 161163 SN: 161164 SN: 161165 SN: 161166 SN: 161191 SN: 161192 SN: 161197 All the boxes have bios version 1.33 but has been some change to the hardware? Any help would be greatly appreciated! Thanks, R > Hello, > > I am having the same issue as was reported to the list already. With > certain 5501s the CF is not detected when the unit is first powered on > but shows up after reboot is passed to combios. > > Currently we have 20 or so units on hand that exhibit this behaviour > while 3 or 4 work as expected. Actually in the units that work the card > is detected as the slave device but it does see the card when powered > up. > > When it doesn't work this is what I see on the serial console: > > POST: 012345689bcefghips1234ajklnopqr,,,tvwxy > > > > > > > > > comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris > Engineering. > > net5501 > > 0256 Mbyte Memory CPU Geode LX 434 Mhz > > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > ------------------------------------------------------------------- > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 > 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 > 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 > 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 > 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 > 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 > 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 > 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 > > 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. > > Intel UNDI, PXE-2.0 (build 082) > Copyright (C) 1997,1998,1999 Intel Corporation > VIA Rhine III Management Adapter v2.43 (2005/12/15) > > CLIENT MAC ADDR: 00 00 24 C9 D6 B4 > PXE-E51: No DHCP or proxyDHCP offers were > received. > > > PXE-M0F: Exiting Intel PXE ROM. > > No Boot device available, enter monitor. > > > comBIOS Monitor. Press ? for help. > > > reboot > > POST: 012345689bcefghips1234ajklnopqr,,,tvwxy > > > > > > > > > comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris > Engineering. > > net5501 > > 0256 Mbyte Memory CPU Geode LX 434 Mhz > > Pri Mas CF 1GB LBA Xlt 983-32-63 990 Mbyte > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > ------------------------------------------------------------------- > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > > The strange part is if I put a hard drive in there (80G sata western > digital) the CF is detected without issue. > > The card is an Adata 1GB speedy compact flash. I have 200 or so, so I > really need them to be detected properly. > > I noted the serial numbers for the units that I could get at and it > looks like they are all from the same lot. > > Working boxes: SN: 145774, SN: 153514 and SN: 158171 (this is a 5501-70) > > Failing boxes: > > SN: 161145 > SN: 161145 > SN: 161145 > SN: 161145 > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
