Hi Bill , I checked the order of the boot commands in boot.conf and i noticed that is different from the order in the document
my boot.conf : set tty com0 stty com0 19200 boot tftp:/bsd.rd the correct order : stty com0 19200 set tty com0 boot tftp:/bsd.rd i tried to reprogram my soekris box using pxebooting but my system hang again after the same message,I’m apparently unlucky; aniss 2009/12/28 Bill Maas <[email protected]> Hi Aniss, > > I sent the previous message prematurely, so let's finish it. The text > comes from the doc I pointed you to. Your Soekris box is probably > booting just fine, you just don't get to witness it;). > > Bill > > > On Mon, 2009-12-28 at 11:58 +0000, aniss siyouti wrote: > > thank you all it works , i installed the packages using local ftp > > server. > > but i have another problem,when i reboot my soekris,The cursor stops > > at the following line : > > "boot> booting hd0a:/bsd: 6563548+1052072=0x7435f8 > > entry point at 0x200120" > > i have changed the boot order, why it always booting on the hd? > > > > ............ > > > show > > > > ConSpeed = 19200 > > ConLock = Enabled > > ConMute = Disabled > > BIOSentry = Enabled > > PCIROMS = Enabled > > PXEBoot = Enabled > > FLASH = Primary > > BootDelay = 5 > > FastBoot = Disabled > > BootPartition = Disabled > > BootDrive = 80 81 F0 FF > > ShowPCI = Enabled > > Reset = Hard > > .............. > > > > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > > ------------------------------------------------------------------- > > 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 > > 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 > > 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 > > 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 > > 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 > > 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 > > 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 > > 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 > > 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 > > > > 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. > > Using drive 0, partition 3. > > Loading... > > probing: pc0 com0 com1 pci mem[639K 511M a20=on] > > disk: hd0+ > > >> OpenBSD/i386 BOOT 3.02 > > switching console to com0 > > >> OpenBSD/i386 BOOT 3.02 > > boot> > > booting hd0a:/bsd: 6563548+1052072=0x7435f8 > > entry point at 0x200120 > > > > > > _______________________________________________ > > Soekris-tech mailing list > > [email protected] > > http://lists.soekris.com/mailman/listinfo/soekris-tech > > >
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
