----- Original Message -----
From: "eric tanguy" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 15, 2004 7:05 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
>
> > What display cat /proc/bus/usb/devices | grep 06b9
> Nothing
Is you usb working? enabled in the bios? ;-)
I think usbcore and usb{ehci|uhci|ohci} is not loaded
What kernel version do you have?
V2.6.5 kernel had problem with many usb adsl modem but usb is not dead like
yours.
> >
> > If it is a speedtouch Rev= 4.00, you mandatory need to use the new V1.2
> > driver and it is not bad for other model.
> > Read what display modem_run usage (particullary for optional bootloader
> > with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
> I downloaded the targz file (1.2) from the sourceforge website and
> installed it with the indications found in the french howto (12 Mai 2004).
> I use alcaudsl.sys from my winxp renamed in mgmt.o and placed in
> /usr/local/share/speedtouch/
If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if it
is a Rev4.00
> With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no answer.
> My biggest problem (i think) is that the leds on the modem are OFF!
> Thanxes
>
> >
> >
> > Liste de diffusion modem ALCATEL SpeedTouch USB
> > Pour se désinscrire :
> > mailto:[EMAIL PROTECTED]
> >
> >
>
>
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se désinscrire :
mailto:[EMAIL PROTECTED]
>
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
