----- Original Message -----
From: "eric tanguy" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 15, 2004 7:30 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
>
>
> > ----- Original Message -----
> > From: "eric tanguy" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Saturday, May 15, 2004 7:05 PM
> > Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
> >
> >
> >>
> >> > What display cat /proc/bus/usb/devices | grep 06b9
> >> Nothing
> >
> > Is you usb working? enabled in the bios? ;-)
> > I think usbcore and usb{ehci|uhci|ohci} is not loaded
> Yes usb works fine i have a scanner and 2 HDs
> >
> > What kernel version do you have?
> > V2.6.5 kernel had problem with many usb adsl modem but usb is not dead
> > like yours.
> I'm not sure but 2.4.? (the initial fedora core 1 kernel because i have no
> internet access ...)
uname -r
will show your running kernel version
lsmod | grep usb
will show what usb driver you use. If nothing is display, you need before
to solve this issue.
Try
modprobe usbcore
on of the three drivers usb-uhci usb-ohci usb-ehci need to be loaded too
with modprobe
next you need to mount usbdevfs with
mount -n -t usbdevfs usbdevfs /proc/bus/usb
> >
> >> >
> >> > If it is a speedtouch Rev= 4.00, you mandatory need to use the new
> >> V1.2 driver and it is not bad for other model.
> >> > Read what display modem_run usage (particullary for optional
> >> bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
> >> I downloaded the targz file (1.2) from the sourceforge website and
> >> installed it with the indications found in the french howto (12 Mai
> >> 2004). I use alcaudsl.sys from my winxp renamed in mgmt.o and placed
> >> in /usr/local/share/speedtouch/
> > If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
> > Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if
> > it is a Rev4.00
> Where can i find these files and how to know the version i have to use ?
You will see the Rev with the first command I send you when your usb will be
in a working state.
cat /proc/bus/usb/devices | grep 06b9
>
> >
> >> With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no
> >> answer. My biggest problem (i think) is that the leds on the modem are
> >> OFF! Thanxes
> >>
> >> >
> >> >
> >> > Liste de diffusion modem ALCATEL SpeedTouch USB
> >> > Pour se d�sinscrire :
> >> > mailto:[EMAIL PROTECTED]
> >> >
> >> >
> >>
> >>
> >>
> >>
> >> Liste de diffusion modem ALCATEL SpeedTouch USB
> >> Pour se d�sinscrire :
> > mailto:[EMAIL PROTECTED]
> >>
> >>
> >>
> >
> >
> > Liste de diffusion modem ALCATEL SpeedTouch USB
> > Pour se d�sinscrire :
> > mailto:[EMAIL PROTECTED]
> >
> >
>
>
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire :
mailto:[EMAIL PROTECTED]
>
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
