pppoatm is loaded (modprobe pppoatm), modem firmware i don't now excatly, i have installed it, do i have to do something to load it? i am root yes, vpi/vci is 8.48 since i live in austria im not sure aubout the user, in the files chap/pap secrets i didn't find something where i could enter the username i'll show you a copy of the files that i have modified and the error message here:
# Secrets for authentication using CHAP # client server secret IP addresses # OUTBOUND CONNECTIONS # Here you should add your PPP Login and PPP password to connect to your # provider via pap. The * means that the entry(login and passoword may be # used for ANY host you connect to. # Thus you do not have to worry about the foreign machine name. Just # replace password with your password. #hostname * ******* (here my password) # PREDIFINED CONNECTIONS # These are user and password entries for publically accessible call-by-call # Internet providers in Germany. If they confict with your config, remove them. # READ_IN_CALLBYCALL_SECRETS # INBOUND CONNECTIONS #client hostname <password> 192.168.1.1 # Secrets for authentication using PAP # client server secret IP addresses # OUTBOUND CONNECTIONS # Here you should add your PPP Login and PPP password to connect to your # provider via pap. The * means that the entry(login and passoword may be # used for ANY host you connect to. # Thus you do not have to worry about the foreign machine name. Just # replace password with your password. #hostname * ******* (pass here) # PREDIFINED CONNECTIONS # These are user and password entries for publically accessible call-by-call # Internet providers in Germany. If they confict with your config, remove them. # READ_IN_CALLBYCALL_SECRETS # INBOUND CONNECTIONS #client hostname <password> 192.168.1.1 # If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, # all users in /etc/passwd can use their password for pap-authentication. # # Every regular user can use PPP and has to use passwords from /etc/passwd #* hostname "" # UserIDs that cannot use PPP at all. Check your /etc/passwd and add any # other accounts that should not be able to use pppd! Replace hostname # with your local hostname. #guest hostname "*" - #master hostname "*" - #root hostname "*" - #support hostname "*" - #stats hostname "*" - this is the /etc/ppp/peers/speedtch file: lcp-echo-interval 10 lcp-echo-failure 3 noipdefault defaultroute user '********' noauth noaccomp nopcomp noccp novj holdoff 4 persist maxfail 25 updetach usepeerdns plugin pppoatm.so 8.48 error message when i type pppd call speedtch: Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname_pppoatm - SUCCESS:8.48 Using interface ppp0 Connect: ppp0 <--> 8.48 LCP terminated by peer Connection terminated. connect(8.48): Address already in use i hope this files show you the problem... @anja, spreche sehr gut deutsch ja :) Franzelot Beso wrote: >are the pppoatm and the modem firmware loaded at startup? if not >loaded, you can't use the modem. >have you granted root priviledges to all the users? if not the script >cannot connect? >are the vci/vpi ok?? if not your isp could not grant you access. >are the user and pass ok?? if not your isp cannot grant access. >try to see if you reply yes to all these questions. if you do so, then >remove the drivers and do the procedure once again trying to compile >the source and not with the source already compiled. > >2005/10/9, Franzelot <[EMAIL PROTECTED]>: > > >>Beso wrote: >> >> >> >>>it should be already connected.... try a link and see if it is really >>>connected.... if you've done every single step in the guide it should >>>connect at startup, so that is the reason why it says you that the >>>address is already in use.... >>> >>>2005/10/9, Franzelot <[EMAIL PROTECTED]>: >>> >>> >>> >>> >>>>hi folks! >>>>i want to connect to the internet with my speedtouch usb modem >>>>i've alredy installed firmware and modified all files told in your how-to >>>> >>>>when i type pppd call speedtc, i get following message >>>>(not exactly these words) >>>> >>>>LCP conntection terminated >>>>connection terminated by peer >>>>adress alredy in use >>>> >>>>what does that mean? >>>>and what can i do? >>>> >>>>thx and greetings >>>>Franzelot >>>>(sry if my english isn't that good :) >>>> >>>> >>>> >>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>-- >>>beso >>> >>>d-_-b >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >>> >>> >>> >>> >>> >>no it is definitly not connected,(browser does not work and i can't ping >>anything) and i don't want my pc to get connected on boot so i didn't >>tell my linux to do so :) because the modem is not always plugged in and >>I do not want to be connected to the internet all the time >> >>lg. >>Franzelot >> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> >> > > >-- >beso > >d-_-b >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
