HURRRAY! it works, ive just added my username to teh pap and chap secrets (where hostname stands) and created this symbolic link thx beso for all your help! greetings franzelot
Franzelot wrote: >the problem is i don't see any "username value" should i replace it with >the hostname? >(before password) >and i don't use any router, the ip was there alredy, i didn't change it >im using the old one, rev 0.00 i think (green, looks a littlebit like a >mouse) > > >Beso wrote: > > > >>i see there is no active chap pap secrets. to do so replace "#xxx >>username * password" with: "your username * your password" in both the >>files, then make a simbolic link to speedtch in the same directory >>with the name "speedtouch". for some reason my suse won't connect >>until i made a link to it. To see if the firmware loads, look >>carefully at system startup verbose and check if the system loads it. >>if you can't see it check the modules loaded at startup and see if it >>loaded or not. >>anyway, from the verbose that you sent it should be everything ok, >>except the secrets of chap and pap, so first try setting them up as >>required. >>if you're using a router (as i can see from the 192.168.1.1 link) try >>to see if your network config is ok. >> >>ps.anyway what type of seepdtouch are you using???? >> >>2005/10/10, Franzelot <[EMAIL PROTECTED]>: >> >> >> >> >>>pppoatm is loaded (modprobe pppoatm), modem firmware i don't now >>>excatly, i have installed it, do i have to do something to load it? >>>i am root yes, vpi/vci is 8.48 since i live in austria >>>im not sure aubout the user, in the files chap/pap secrets i didn't find >>>something where i could enter the username >>>i'll show you a copy of the files that i have modified and the error >>>message here: >>> >>># Secrets for authentication using CHAP >>># client server secret IP addresses >>> >>># OUTBOUND CONNECTIONS >>># Here you should add your PPP Login and PPP password to connect to your >>># provider via pap. The * means that the entry(login and passoword may be >>># used for ANY host you connect to. >>># Thus you do not have to worry about the foreign machine name. Just >>># replace password with your password. >>>#hostname * ******* (here my password) >>> >>># PREDIFINED CONNECTIONS >>># These are user and password entries for publically accessible call-by-call >>># Internet providers in Germany. If they confict with your config, >>>remove them. >>># READ_IN_CALLBYCALL_SECRETS >>> >>># INBOUND CONNECTIONS >>>#client hostname <password> 192.168.1.1 >>> >>> >>> >>> >>> >>># Secrets for authentication using PAP >>># client server secret IP addresses >>> >>># OUTBOUND CONNECTIONS >>># Here you should add your PPP Login and PPP password to connect to your >>># provider via pap. The * means that the entry(login and passoword may be >>># used for ANY host you connect to. >>># Thus you do not have to worry about the foreign machine name. Just >>># replace password with your password. >>>#hostname * ******* (pass here) >>> >>># PREDIFINED CONNECTIONS >>># These are user and password entries for publically accessible call-by-call >>># Internet providers in Germany. If they confict with your config, >>>remove them. >>># READ_IN_CALLBYCALL_SECRETS >>> >>># INBOUND CONNECTIONS >>>#client hostname <password> 192.168.1.1 >>> >>># If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, >>># all users in /etc/passwd can use their password for pap-authentication. >>># >>># Every regular user can use PPP and has to use passwords from /etc/passwd >>>#* hostname "" >>># UserIDs that cannot use PPP at all. Check your /etc/passwd and add any >>># other accounts that should not be able to use pppd! Replace hostname >>># with your local hostname. >>>#guest hostname "*" - >>>#master hostname "*" - >>>#root hostname "*" - >>>#support hostname "*" - >>>#stats hostname "*" - >>> >>>this is the /etc/ppp/peers/speedtch file: >>> >>>lcp-echo-interval 10 >>>lcp-echo-failure 3 >>>noipdefault >>>defaultroute >>>user '********' >>>noauth >>>noaccomp >>>nopcomp >>>noccp >>>novj >>>holdoff 4 >>>persist >>>maxfail 25 >>>updetach >>>usepeerdns >>>plugin pppoatm.so >>>8.48 >>> >>>error message when i type pppd call speedtch: >>> >>>Plugin pppoatm.so loaded. >>>PPPoATM plugin_init >>>PPPoATM setdevname_pppoatm - SUCCESS:8.48 >>>Using interface ppp0 >>>Connect: ppp0 <--> 8.48 >>>LCP terminated by peer >>>Connection terminated. >>>connect(8.48): Address already in use >>> >>> >>>i hope this files show you the problem... >>> >>>@anja, spreche sehr gut deutsch ja :) >>> >>>Franzelot >>> >>> >>> >>> >>> >>>Beso wrote: >>> >>> >>> >>> >>> >>>>are the pppoatm and the modem firmware loaded at startup? if not >>>>loaded, you can't use the modem. >>>>have you granted root priviledges to all the users? if not the script >>>>cannot connect? >>>>are the vci/vpi ok?? if not your isp could not grant you access. >>>>are the user and pass ok?? if not your isp cannot grant access. >>>>try to see if you reply yes to all these questions. if you do so, then >>>>remove the drivers and do the procedure once again trying to compile >>>>the source and not with the source already compiled. >>>> >>>>2005/10/9, Franzelot <[EMAIL PROTECTED]>: >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Beso wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>it should be already connected.... try a link and see if it is really >>>>>>connected.... if you've done every single step in the guide it should >>>>>>connect at startup, so that is the reason why it says you that the >>>>>>address is already in use.... >>>>>> >>>>>>2005/10/9, Franzelot <[EMAIL PROTECTED]>: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>hi folks! >>>>>>>i want to connect to the internet with my speedtouch usb modem >>>>>>>i've alredy installed firmware and modified all files told in your how-to >>>>>>> >>>>>>>when i type pppd call speedtc, i get following message >>>>>>>(not exactly these words) >>>>>>> >>>>>>>LCP conntection terminated >>>>>>>connection terminated by peer >>>>>>>adress alredy in use >>>>>>> >>>>>>>what does that mean? >>>>>>>and what can i do? >>>>>>> >>>>>>>thx and greetings >>>>>>>Franzelot >>>>>>>(sry if my english isn't that good :) >>>>>>> >>>>>>> >>>>>>> >>>>>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>-- >>>>>>beso >>>>>> >>>>>>d-_-b >>>>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>no it is definitly not connected,(browser does not work and i can't ping >>>>>anything) and i don't want my pc to get connected on boot so i didn't >>>>>tell my linux to do so :) because the modem is not always plugged in and >>>>>I do not want to be connected to the internet all the time >>>>> >>>>>lg. >>>>>Franzelot >>>>> >>>>> >>>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>-- >>>>beso >>>> >>>>d-_-b >>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >>> >>> >>> >>-- >>beso >> >>d-_-b >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> >> >> >> >> >> > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
