Regards, I now got the message:
Discarded non-LCP packet when LCP not open Thanks for any thoughts .. Giovanni On 8/7/06, Giovanni Carpanetti <[EMAIL PROTECTED]> wrote: > > Morning Gilles, > > When you configure the adsl on Windoze, with the CD the ISP (Cable & > Wireless) gave me, you have two options: PPPoE and RFC1483 (Multiprotocol > over ATM). You have to choose the 2nd option, so I assume C&W uses PPPoA. > But yes, I guess as you correctly point that they're authenticating myself > at the hw level. > > With the Windoze utility you get after installation, the VC / VP fields > are set to the ones I'm sending (1/32). > > Merci beaucoup for your comments and thoughts. Regards, > > Giovanni > > > On 8/7/06, Gilles Espinasse <[EMAIL PROTECTED]> wrote: > > > > > > > > ----- Original Message ----- > > From: "Giovanni Carpanetti" <[EMAIL PROTECTED]> > > To: <[email protected] > > > Sent: Monday, August 07, 2006 7:42 AM > > Subject: [speedtouch] Re: Problems connecting SpeedTouch 330 USB PPPoA > > to > > Inspiron E1505 (Ubuntu 6.06) > > > > > > > > > > Next step .. > > > > > > I ran pppd call speedtch and I got this: > > > > > > Plugin pppoatm.so loaded > > > pppd 2.4.4b1 started by user, uid 0 > > > Using interface ppp0 > > > Connect: ppp <--> 1.32 > > > LCP: Timeout sending Config-Requests > > > Connection terminated > > > Modem hangup > > > Exit > > > > > > ---- Again .. is there something I'm doing wrong here? Thanks > > > > > > Giovanni > > > > > Are you sure that VPI=1, VCI=32 are right? > > Concerning login and password, I have never seen one using PPPoA or > > PPPoE > > without login/password. > > There is other ways for the ISP to authenticate the user at the hardware > > level when you are directly connected to the ISP hardware plateform. In > > this > > case, another protocol than PPP(oX) could be used. > > > > Gilles > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > ?subject=unsubscribe > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
