hi, i`ve just found this quite lengthy webpage, http://pptpclient.sourceforge.net/howto-diagnosis.phtml#lcp_no_network_protocols
i`m not sure how much help it`ll be, but it might help u figure out to why your getting the lcp probs rizz Gilles Espinasse wrote: > ----- Original Message ----- > From: "Giovanni Carpanetti" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, August 07, 2006 7:42 AM > Subject: [speedtouch] Re: Problems connecting SpeedTouch 330 USB PPPoA to > Inspiron E1505 (Ubuntu 6.06) > > > >> Next step .. >> >> I ran pppd call speedtch and I got this: >> >> Plugin pppoatm.so loaded >> pppd 2.4.4b1 started by user, uid 0 >> Using interface ppp0 >> Connect: ppp <--> 1.32 >> LCP: Timeout sending Config-Requests >> Connection terminated >> Modem hangup >> Exit >> >> ---- Again .. is there something I'm doing wrong here? Thanks >> >> Giovanni >> >> > Are you sure that VPI=1, VCI=32 are right? > Concerning login and password, I have never seen one using PPPoA or PPPoE > without login/password. > There is other ways for the ISP to authenticate the user at the hardware > level when you are directly connected to the ISP hardware plateform. In this > case, another protocol than PPP(oX) could be used. > > Gilles > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
