Hi Duncan The dmesg | less command reveals 100s of lines of info! However, an initial visual scan reveals the following 2 lines:
[ 28.813332] speedtch 1-1:1.0: found stage 1 firmware speedtch-1.bin [ 28.966755] speedtch 1-1:1.0: found stage 2 firmware speedtch-2.bin I'm afraid I'm a bit out of my depth interpreting some of this information, but the above at least looks a bit positive! Roger. >From: Duncan Sands <[EMAIL PROTECTED]> >Reply-To: [email protected] >To: [email protected] >Subject: [speedtouch] Re: Feisty >Date: Tue, 25 Sep 2007 13:18:20 +0200 > > > > > Whilst switching between desktops, I did notice the message come up on > > > booting stating "The Speedtouch Firmware did not load." This seems to >be > > > a > > > vital clue; does anyone have any suggestions ? > > > > If the firmware doesn't load, no connection can be made at all. > >Yes, however Roger previously sent the contents of /proc/net/atm/speed* >which showed: > > Speed Touch USB (usb-0000:00:03.0-1) > MAC: 00:90:d0:37:b0:ab > AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop ) > Line up > >i.e. the firmware is loaded. > >Maybe he is running one of those scripts you can find on the web which >tries to set up your speedtouch connection for you, perhaps using modem_run >to load firmware? Or perhaps he just misread the boot message (Roger, you >can read all boot messages by running > dmesg >in a terminal. Maybe > dmesg | less >is better, otherwise you'll maybe get too much stuff). > >Ciao, > >Duncan. > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : >mailto:[EMAIL PROTECTED] > > _________________________________________________________________ Get Pimped! FREE emoticon packs from Windows Live - http://www.pimpmylive.co.uk Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
