That might help, not sure, it's mainly a County Fire Marshall Inspector's interpretation of 13 vs. the usual interpretation. If he won't back off we can install a 175F head and walk away.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Church Sent: Friday, March 30, 2007 4:34 PM To: [email protected] Subject: RE: Try This Would checking with the HVAC guys about what temp the diffuser effuse is help at all? glc -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Minkel Sent: Friday, March 30, 2007 3:48 PM To: [email protected] Subject: RE: Try This OK, try this: draw a 2x2 tile ceiling in some scale, make an x in one 2x2 box for the diffuser & a dot in any adjacent box for the sprinkler, then draw a circle with a 12" radius from edge. Try and draw that and email me the drawing ([EMAIL PROTECTED]) so I can properly visualize it. I would draw that myself but I can't follow my own directions. Some AHJ looking up at a 2x2 HVAC outlet has not a clue as to whether it is connected to a 4" duct, 6" duct, 8" duct, etc, he sees a square grill like device. _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
