We have done these in a range from light hazard to Ord Gp 1, depending on the configuration and what the insurance carrier had recommended. So, you could be looking at minimum design densities of .10/1500 for light hazard to .015/1500 for Ord Gp 1, again depending on if an insurance carrier is involved.
Loren Johnson - CFPS, CET Fire Systems Consultant The Hitchcock Company Peoria, IL --- Richard Lindner <[EMAIL PROTECTED]> wrote: > The ones I have designed for were light hazard and > we did double interlock > dry pipe based on input from the owner. > > On Tue, Jun 3, 2008 at 10:28 AM, Joe Burtell > <[EMAIL PROTECTED]> wrote: > > > Can anyone point me in the right direction for > design criteria for a data > > center? All we know so far is I have data storage > and battery racks about > > 7' > > tall. This room is roughly 15,000 sq. ft. > > > > Best regards, > > > > Joe Burtell, SET, CFPS > > Burtell Fire Protection, Inc. > > Phone: 406.652.7697 > > Fax: 406.652.7743 > > Cell: 406.861.4507 > > Email: [EMAIL PROTECTED] > > Web Site: http://www.burtellfire.com > > > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > > To Unsubscribe, send an email > to:[EMAIL PROTECTED]<[EMAIL PROTECTED]> > > (Put the word unsubscribe in the subject field) > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
