We have used the Tolco Fig. 20 to meet the short strap type hanger. I'm sure there are many others available from other MFG's
Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Allan Seidel Sent: Monday, June 09, 2008 10:34 PM To: [email protected] Subject: Re: When all horizontal pipe hangers are supports from below In this case the ONLY available support locations are 10 feet one direction (for the mains) and 5 feet in the other direction (branch lines). Plus, anything visible, if allowed at all, must be "pure" to the Architect's eye. Therefore there can be no surprises and little left to chance. This forum is another rock that cannot be left unturned. Thanks again, Allan Seidel St. Louis. MO On Jun 9, 2008, at 10:43 PM, Ron Greenman wrote: > I think you may be over engineering this problem _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
