Thanks. One question: How do you get a trash can with 100# of water off the third floor of a house without creating a disaster?
At 02:11 PM 12/21/2009, you wrote: >Todd, >Take a 1" copper or CPVC pipe, 5' long. On one end place male >threads to be screwed into the over head. At the other end place a >female connection for the sprinkler head (break the deflector off). >In between place a 1/4 turn valve. Place a 30 gal trash can >(pre-marked at gallon increments) under the pipe. Charge the system, >bleed the air, open the valve and time it for one minute. There ya go! >Hope that helps. >Owen Evans >Redondo Beach Fire Dept. > > >>> Todd Williams <[email protected]> 12/21/2009 10:23 AM >>> >Does anyone have a good description of how to do a bucket test? I >have a client who has been asked to do one on a 13D system but hasn't >done one before. I have a general idea, but would appreciate input >from someone with more experience. > >Todd G. Williams, PE >Fire Protection Design/Consulting >Stonington, Connecticut >www.fpdc.com >860.535.2080 >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
