You know you CAN produce a suction line by sucking really hard- the local
inspector should have plenty of zip....

And to get 100 gallons in there in a minute from a K4.4 head, boy you must
have tanks atop some really big hills. Like a tank 1,000' uphill, since
you'd need about 500 PSI to get 100 GPM out of a K4.4. Might want to run the
test at only 30 seconds, and I'd check that end head restraint, cover the
trash can for the inevitable splash. 

So do you hydro at 550?

glc

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of G. Tim Stone
Sent: Monday, December 21, 2009 2:48 PM
To: [email protected]
Subject: RE: Bucket test

Todd,

Pump it off into the nearest toilet or window would be my suggestion.

G. Tim Stone


NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services

117 Old Stage Rd. - Essex Jct., VT. 05452
TEL: (802) 434-2968          Fax: (802) 434-4343
                [email protected]


> -----Original Message-----
> From: [email protected] [mailto:sprinklerforum-
> [email protected]] On Behalf Of Todd Williams
> Sent: Monday, December 21, 2009 2:43 PM
> To: [email protected]
> Subject: Re: Bucket test
> 
> Thanks. One question: How do you get a trash can with 100# of water
> off the third floor of a house without creating a disaster?
> 
> 
> At 02:11 PM 12/21/2009, you wrote:
> >Todd,
> >Take a 1" copper or CPVC pipe, 5' long. On one end place male
> >threads to be screwed into the over head. At the other end place a
> >female connection for the sprinkler head (break the deflector off).
> >In between place a 1/4 turn valve. Place a 30 gal trash can
> >(pre-marked at gallon increments) under the pipe. Charge the system,
> >bleed the air, open the valve and time it for one minute.  There ya
> go!
> >Hope that helps.
> >Owen Evans
> >Redondo Beach Fire Dept.
> >
> > >>> Todd Williams <[email protected]> 12/21/2009 10:23 AM >>>
> >Does anyone have a good description of how to do a bucket test? I
> >have a client who has been asked to do one on a 13D system but hasn't
> >done one before. I have a general idea, but would appreciate input
> >from someone with more experience.
> >
> >Todd G. Williams, PE
> >Fire Protection Design/Consulting
> >Stonington, Connecticut
> >www.fpdc.com
> >860.535.2080
> >_______________________________________________
> >Sprinklerforum mailing list
> >[email protected]
> >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> >
> >For Technical Assistance, send an email to: [email protected]
> >
> >To Unsubscribe, send an email to:Sprinklerforum-
> [email protected]
> >(Put the word unsubscribe in the subject field)
> >_______________________________________________
> >Sprinklerforum mailing list
> >[email protected]
> >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> >
> >For Technical Assistance, send an email to: [email protected]
> >
> >To Unsubscribe, send an email to:Sprinklerforum-
> [email protected]
> >(Put the word unsubscribe in the subject field)
> 
> Todd G. Williams, PE
> Fire Protection Design/Consulting
> Stonington, Connecticut
> www.fpdc.com
> 860.535.2080
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> For Technical Assistance, send an email to: [email protected]
> 
> To Unsubscribe, send an email to:Sprinklerforum-
> [email protected]
> (Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to