Something I overlooked until about 8 years ago: 1.2 x AREA USED---
Example 1500 SF- min. length 46.5', maybe 4 heads---- 1590 SF- min. length
48', maybe 5 heads!

-----Original Message-----
From: Roland Huggins [mailto:[email protected]] 
Sent: Tuesday, April 20, 2010 9:36 AM
To: [email protected]
Subject: Re: Calc Area

counting sprinklers is ONLY a casual means to check to ensure you are  
CLOSE to the required floor area.  You must measure actual floor area  
with no regard to sprinkler spacing or distance to wall.  Now in  
defining the area of coverage for each sprinkler, your question raises  
a point often asked.  In a non-symmetrical layout, you use the longer  
on each side to define S and L such that the sprinkler is always in  
the center of the imaginary box.  Not well explained by the standard  
since it mainly talks about distance to walls.

Roland


On Apr 19, 2010, at 11:41 PM, George Medina Jr wrote:

>
> If I am calculating a tree type system using the area/design method,  
> and have several different lengths between sprinklers on a branch  
> line. Would I use the longest length to determine the amount of
> sprinklers on a branch line. I have always used an average (which  
> I've probably been wrong all these years).
>
> 1.2vdesign area
>           S
> S= Distance between sprinklers on branch line
>
>
>
> 1.2vdesign area
>           S
> S= Distance between sprinklers on branch line
>
>
>
>
> George Medina Jr.
>
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to