And remember that FM is 1:1.4 suggesting that the adjusted ratio for
each entity has to be equal to or greater than 1: 1.2 (NFPA) or 1:1.4
(FM).

On Tue, Apr 20, 2010 at 7:54 AM, Brad <[email protected]> wrote:
> Something I overlooked until about 8 years ago: 1.2 x AREA USED---
> Example 1500 SF- min. length 46.5', maybe 4 heads---- 1590 SF- min. length
> 48', maybe 5 heads!
>
> -----Original Message-----
> From: Roland Huggins [mailto:[email protected]]
> Sent: Tuesday, April 20, 2010 9:36 AM
> To: [email protected]
> Subject: Re: Calc Area
>
> counting sprinklers is ONLY a casual means to check to ensure you are
> CLOSE to the required floor area.  You must measure actual floor area
> with no regard to sprinkler spacing or distance to wall.  Now in
> defining the area of coverage for each sprinkler, your question raises
> a point often asked.  In a non-symmetrical layout, you use the longer
> on each side to define S and L such that the sprinkler is always in
> the center of the imaginary box.  Not well explained by the standard
> since it mainly talks about distance to walls.
>
> Roland
>
>
> On Apr 19, 2010, at 11:41 PM, George Medina Jr wrote:
>
>>
>> If I am calculating a tree type system using the area/design method,
>> and have several different lengths between sprinklers on a branch
>> line. Would I use the longest length to determine the amount of
>> sprinklers on a branch line. I have always used an average (which
>> I've probably been wrong all these years).
>>
>> 1.2vdesign area
>>           S
>> S= Distance between sprinklers on branch line
>>
>>
>>
>> 1.2vdesign area
>>           S
>> S= Distance between sprinklers on branch line
>>
>>
>>
>>
>> George Medina Jr.
>>
>>
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>>
>> For Technical Assistance, send an email to: [email protected]
>>
>> To Unsubscribe, send an email to:[email protected]
>> (Put the word unsubscribe in the subject field)
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
>



-- 
Ron Greenman
Instructor
Fire Protection Engineering
Bates Technical College
Tacoma, WA

Member:
SFPE, ASCET, NFPA, AFSA, NFSA AFAA, NIBS, WSAFM, WFC
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to