I do not know of better way. I would suggest however, instead of plugs, higher temp heads be installed until process is complete, then regular (NEW) sprinklers installed). The thought of heaters, blanket, poly, and no protection seems like some sort of recipe to me..,
R/ Matt -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ford, Charles Sent: Thursday, February 28, 2013 9:17 AM To: [email protected] Subject: RE: Bedbugs Ok, new issue (to me) Customer (sorta a funded group retirement home) has bedbug problem. Bedbug exterminator has been hired. The process is to isolate and heat the rooms (2 per day) to about 175 degrees F with special heaters and therefore cook the bugs and their eggs. The property is sprinklered. Sprinkler contractor has been hired to drain the system, remove and plug heads in 2 rooms and refill. End of day, restore the system. Repeat process 17 times. Has anybody dealt with this? Is there a better way. Is there a cheaper way? C. Burton Ford NICET Certified IV NFPA Certified Fire Protection Specialist Cintas Fire Protection Inc 1038 Conshohocken Rd Conshohocken, PA 19428 Tel 610-233-1400 Fax 610-233-1401 This e-mail transmission contains information that is intended to be confidential and privileged. If you receive this e-mail and you are not a named addressee you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this communication without the consent of the sender and that doing so is prohibited and may be unlawful. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please delete and otherwise erase it and any attachments from your computer system. Your assistance in correcting this error is appreciated. _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
