How do you replace heads based on a minimum density that no longer exists? Speaking of the residential heads before the 0.05 minimum of today? Sounds like a few nightmares having to re-calc and replace piping in some circumstances?
Chris Cahill, PE* Senior Fire Protection Engineer, Aviation & Facilities Group Burns & McDonnell 8201 Norman Center Drive Bloomington, MN 55437 Phone: 952.656.3652 Fax: 952.229.2923 [email protected] www.burnsmcd.com Proud to be one of FORTUNE's 100 Best Companies to Work For *Registered in: MN -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John O'Connor Sent: Thursday, February 28, 2013 9:51 AM To: [email protected] Subject: RE: Bedbugs We had been involved in the Bed-bug remediation about two years ago. On day one we changed all heads to be subject to 175° heat-up to high temp heads, if I remember correctly, used 286°. They did the heat remediation, and after all the bugs are gone, we went back and replaced all heads with the original. Worked pretty well. John O'Connor National Fire Sprinklers, Nashville TN -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ford, Charles Sent: Thursday, February 28, 2013 8:17 AM To: [email protected] Subject: RE: Bedbugs Ok, new issue (to me) Customer (sorta a funded group retirement home) has bedbug problem. Bedbug exterminator has been hired. The process is to isolate and heat the rooms (2 per day) to about 175 degrees F with special heaters and therefore cook the bugs and their eggs. The property is sprinklered. Sprinkler contractor has been hired to drain the system, remove and plug heads in 2 rooms and refill. End of day, restore the system. Repeat process 17 times. Has anybody dealt with this? Is there a better way. Is there a cheaper way? C. Burton Ford NICET Certified IV NFPA Certified Fire Protection Specialist Cintas Fire Protection Inc 1038 Conshohocken Rd Conshohocken, PA 19428 Tel 610-233-1400 Fax 610-233-1401 This e-mail transmission contains information that is intended to be confidential and privileged. If you receive this e-mail and you are not a named addressee you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this communication without the consent of the sender and that doing so is prohibited and may be unlawful. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please delete and otherwise erase it and any attachments from your computer system. Your assistance in correcting this error is appreciated. _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1430 / Virus Database: 2641/5636 - Release Date: 02/27/13 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
