Also known as a cut and shut bend! On 25 Jun 2013, at 15:54, "Morey, Mike" <[email protected]> wrote:
> A fitting (typically grooved) created from segments (pie wedges) of pipe that > are welded together to create a bend. Similar to this, but you'd see them > grooved for fire protection use: > http://seek.autodesk.com/product/latest/agg/victaulic/Victaulic/00297Victaulic124 > Also commonly called a Seg Weld, Segmentally welded fitting, etc. They > aren't super common anymore but they're out there. > > > Mike Morey, SET, CFPS > Sprinkler Designer > BMW Constructors, Inc. > O: 317.651.0596 | C: 317.586.8111 > www.bmwc.com <http://www.bmwc.com/> > > > ________________________________ > > From: [email protected] on behalf of Easter, > Timothy > Sent: Tue 6/25/2013 10:54 AM > To: [email protected] > Subject: segmented-welded fittings > > > > UFGS states segmented welded fittings shall not be used. What is a segmented > welded fitting? > Thanks, > > Timothy Easter > E.I.T. > Graduate Fire Protection Engineer > > > > This e-mail and any attachments contain URS Corporation confidential > information that may be proprietary or privileged. If you receive this > message in error or are not the intended recipient, you should not retain, > distribute, disclose or use any of this information and you should destroy > the e-mail and any attachments or copies. > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
