Just to give equal time to a firm that supports the AFSA I have done business with Texas Manufacturing for more than 30 years. I'm not saying That IOWA does not support AFSA I just know these guy's and the products they make are of great quality. Listed products, certified welders and all around good guy's.
http://www.texline.com/pipes.asp Mike Sent from my iPhone On Jun 25, 2013, at 2:09 PM, Aaron Peck <[email protected]> wrote: > Sorry I hit send before I finished. > > I can't recall about them being listed but I assume they are since I used > them in the past in several churches. They were great under the stage on the > curves. > > Aaron M. Peck SET > NICET IV (Fire) > +1 (202) 407-9079 Skype > +855 (78) 700-407 Cellphone > Sent from my iPhone > > On Jun 26, 2013, at 2:07, Aaron Peck <[email protected]> wrote: > >> I recommend Iowa Fittings, they always made to order what I needed. >> >> Aaron M. Peck SET >> NICET IV (Fire) >> +1 (202) 407-9079 Skype >> +855 (78) 700-407 Cellphone >> Sent from my iPhone >> >> On Jun 25, 2013, at 22:55, Richard Carr <[email protected]> wrote: >> >>> Iowa makes some that are listed. >>> >>> >>> From my Android phone on T-Mobile. The first nationwide 4G network. >>> >>> -------- Original message -------- >>> Subject: Re: segmented-welded fittings >>> From: John Lewis <[email protected]> >>> To: "[email protected]" >>> <[email protected]> >>> CC: >>> >>> Were they UL listed? >>> >>> >>> >>> Thanks, >>> J. Lewis >>> >>> >>> >>> >>>> ________________________________ >>>> From: "[email protected]" <[email protected]> >>>> To: [email protected] >>>> Sent: Tuesday, June 25, 2013 8:18 AM >>>> Subject: RE: segmented-welded fittings >>>> >>>> >>>> We just installed some 16" Victaulic segment welded grooved elbows in a >>>> pump suction line. >>>> >>>> Ron F >>>> >>>> -----Original Message----- >>>> From: [email protected] >>>> [mailto:[email protected]] On Behalf Of John >>>> Lewis >>>> Sent: Tuesday, June 25, 2013 8:03 AM >>>> To: [email protected] >>>> Subject: Re: segmented-welded fittings >>>> >>>> It is pipe mitered with a cut of saw and welded together to form a 90 or >>>> tee. >>>> The friction loss is very high in these type. I haven't heard of them >>>> being used since the 70's. >>>> >>>> >>>> >>>> Thanks, >>>> J. Lewis >>>> >>>> >>>> >>>> >>>>> ________________________________ >>>>> From: "Easter, Timothy" <[email protected]> >>>>> To: "[email protected]" >>>>> <[email protected]> >>>>> Sent: Tuesday, June 25, 2013 7:54 AM >>>>> Subject: segmented-welded fittings >>>>> >>>>> >>>>> UFGS states segmented welded fittings shall not be used. What is a >>>>> segmented welded fitting? >>>>> Thanks, >>>>> >>>>> Timothy Easter >>>>> E.I.T. >>>>> Graduate Fire Protection Engineer >>>>> >>>>> >>>>> >>>>> This e-mail and any attachments contain URS Corporation confidential >>>>> information that may be proprietary or privileged. If you receive this >>>>> message in error or are not the intended recipient, you should not >>>>> retain, distribute, disclose or use any of this information and you >>>>> should destroy the e-mail and any attachments or copies. >>>>> _______________________________________________ >>>>> Sprinklerforum mailing list >>>>> [email protected] >>>>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >>>> _______________________________________________ >>>> Sprinklerforum mailing list >>>> [email protected] >>>> http://lists.fires >>> _______________________________________________ >>> Sprinklerforum mailing list >>> [email protected] >>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
