Sorry I hit send before I finished. I can't recall about them being listed but I assume they are since I used them in the past in several churches. They were great under the stage on the curves.
Aaron M. Peck SET NICET IV (Fire) +1 (202) 407-9079 Skype +855 (78) 700-407 Cellphone Sent from my iPhone On Jun 26, 2013, at 2:07, Aaron Peck <[email protected]> wrote: > I recommend Iowa Fittings, they always made to order what I needed. > > Aaron M. Peck SET > NICET IV (Fire) > +1 (202) 407-9079 Skype > +855 (78) 700-407 Cellphone > Sent from my iPhone > > On Jun 25, 2013, at 22:55, Richard Carr <[email protected]> wrote: > >> Iowa makes some that are listed. >> >> >> From my Android phone on T-Mobile. The first nationwide 4G network. >> >> -------- Original message -------- >> Subject: Re: segmented-welded fittings >> From: John Lewis <[email protected]> >> To: "[email protected]" >> <[email protected]> >> CC: >> >> Were they UL listed? >> >> >> >> Thanks, >> J. Lewis >> >> >> >> >>> ________________________________ >>> From: "[email protected]" <[email protected]> >>> To: [email protected] >>> Sent: Tuesday, June 25, 2013 8:18 AM >>> Subject: RE: segmented-welded fittings >>> >>> >>> We just installed some 16" Victaulic segment welded grooved elbows in a >>> pump suction line. >>> >>> Ron F >>> >>> -----Original Message----- >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of John >>> Lewis >>> Sent: Tuesday, June 25, 2013 8:03 AM >>> To: [email protected] >>> Subject: Re: segmented-welded fittings >>> >>> It is pipe mitered with a cut of saw and welded together to form a 90 or >>> tee. >>> The friction loss is very high in these type. I haven't heard of them being >>> used since the 70's. >>> >>> >>> >>> Thanks, >>> J. Lewis >>> >>> >>> >>> >>>> ________________________________ >>>> From: "Easter, Timothy" <[email protected]> >>>> To: "[email protected]" >>>> <[email protected]> >>>> Sent: Tuesday, June 25, 2013 7:54 AM >>>> Subject: segmented-welded fittings >>>> >>>> >>>> UFGS states segmented welded fittings shall not be used. What is a >>>> segmented welded fitting? >>>> Thanks, >>>> >>>> Timothy Easter >>>> E.I.T. >>>> Graduate Fire Protection Engineer >>>> >>>> >>>> >>>> This e-mail and any attachments contain URS Corporation confidential >>>> information that may be proprietary or privileged. If you receive this >>>> message in error or are not the intended recipient, you should not retain, >>>> distribute, disclose or use any of this information and you should destroy >>>> the e-mail and any attachments or copies. >>>> _______________________________________________ >>>> Sprinklerforum mailing list >>>> [email protected] >>>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >>> _______________________________________________ >>> Sprinklerforum mailing list >>> [email protected] >>> http://lists.fires >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
