We just installed some 16" Victaulic segment welded grooved elbows in a pump suction line.
Ron F -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Lewis Sent: Tuesday, June 25, 2013 8:03 AM To: [email protected] Subject: Re: segmented-welded fittings It is pipe mitered with a cut of saw and welded together to form a 90 or tee. The friction loss is very high in these type. I haven't heard of them being used since the 70's. Thanks, J. Lewis >________________________________ > From: "Easter, Timothy" <[email protected]> >To: "[email protected]" ><[email protected]> >Sent: Tuesday, June 25, 2013 7:54 AM >Subject: segmented-welded fittings > > >UFGS states segmented welded fittings shall not be used. What is a segmented >welded fitting? >Thanks, > >Timothy Easter >E.I.T. >Graduate Fire Protection Engineer > > > >This e-mail and any attachments contain URS Corporation confidential >information that may be proprietary or privileged. If you receive this message >in error or are not the intended recipient, you should not retain, distribute, >disclose or use any of this information and you should destroy the e-mail and >any attachments or copies. >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
