Thanks guys, I didn’t even know about 3-26. We will confirm everything with FM before submitting.
*From:* Sprinklerforum [mailto: [email protected]] *On Behalf Of *Matt Grise *Sent:* Thursday, September 29, 2016 9:44 AM *To:* [email protected] *Subject:* RE: FM Global When I have done “non-factory” projects with FM global (most recently a retirement home) they were very flexible in modifying their requirements to suit the project. In occupancies that don’t directly correlate to their core business I have had good luck with compromises. Cesar is right – confirm all design guidelines in writing from FM if they are any different from the ones spelled out in the data sheets. Matt Grisé PE*, LEED AP, NICET II Vice President – New Construction *Alliance Fire Protection* 130 w 9th Ave. North Kansas City, MO 64116 **Licensed in KS & MO* 913.888.0647 ph 913.888.0618 f 913.526.7443 cell *www. AFPsprink.com* *From:* Sprinklerforum [ mailto:[email protected] <[email protected]>] *On Behalf Of *Cesar Lira *Sent:* Thursday, September 29, 2016 9:31 AM *To:* [email protected] *Subject:* RE: FM Global Hi Dewayne. Accord to 3-26 table 1. Both areas Seating areas and kitchen are a HC1 Hazard and sprinkler design is 0.1/1500 + 250 gpm using a 5.6 k factor sprinklers. Also you need to wait for FM insurance recommendations. CLR *De:* Sprinklerforum [mailto:[email protected] <[email protected]>] *En nombre de *Dewayne Martinez *Enviado el:* jueves, 29 de septiembre de 2016 08:14 a. m. *Para:* [email protected] *Asunto:* FM Global We are doing a small restaurant tenant in a strip mall that is insured by FM Global. I have contacted the GC asking for the FM contact but thought maybe the forum could provide some insight. 1)Does FM allow reduced design areas? 2)Seating area 01./1500 +100gpm and kitchen 0.15/1500 +250gpm sound right? Thanks, Dewayne
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
