Paul O
To gain the wisdom that is out there.
Also to see if anyone is working, like you, with pre-mixing.
My thoughts aren't yet well enough formed to bother a whole group - but I am
thinking open
source, like you
Ron
On May 25, 2013, at 4:34 PM, Paul Olivier <[email protected]> wrote:
> Ron,
>
> Why discuss this on the list?
>
> Paul
>
>
> On Sat, May 25, 2013 at 7:35 PM, Ron <[email protected]> wrote:
> Paul
>
> Thanks for guidance.
>
> The reason for not discussing on the list?
>
> Ron
>
>
>
> On May 24, 2013, at 11:08 PM, Paul Anderson <[email protected]> wrote:
>
>> Ron,
>>
>> On behalf of myself and two who are not subscribed to the Stoves Listserv
>> (Hugh McLaughlin and another Ron, last name Vanetten, who is working with me
>> in Normal Illinois), we each respond "Count me in."
>>
>> Once you have your concept in an explainable form (words, diagrams, etc),
>> please consider sending it to those whom YOU select to be included in the
>> early stages of development. But this should not be an open discussion on
>> the Listserv. You have started to form the group. Let's see who might be
>> qualified to be in the inner circle. Then Ron V. and I and others can also
>> share our progress.
>>
>> I hope that you might be surprised at how far some of us have progressed in
>> that direction, or what we can contribute to make your initial mockup easier
>> and better.
>>
>> Paul
>> Paul S. Anderson, PhD aka "Dr TLUD"
>> Email: [email protected] Skype: paultlud Phone: +1-309-452-7072
>> Website: www.drtlud.com
>> On 5/24/2013 5:48 PM, [email protected] wrote:
>>> List:
>>>
>>> I have a conceptual design for a different type of TLUD (squat,
>>> extensive preheating of both types of air, balancing of their ratio, and a
>>> pre-mixed flame). More costly than using one can above another, but maybe
>>> less costly over long run, through increased lifetime, efficiency and good
>>> turn down ratio. Might be able to modify to enable natural draft. Lots of
>>> unknowns still.
>>>
>>> I'd appreciate joining forces with anyone, but especially those now
>>> working with fans and fan controllers.
>>>
>>> Hoping for a mockup to take to Dean Still's summer camp.
>>>
>>> Ron
>>>
>>>
>>> _______________________________________________
>>> Stoves mailing list
>>>
>>> to Send a Message to the list, use the email address
>>> [email protected]
>>>
>>> to UNSUBSCRIBE or Change your List Settings use the web page
>>> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>>>
>>> for more Biomass Cooking Stoves, News and Information see our web site:
>>> http://stoves.bioenergylists.org/
>>>
>>
>
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> [email protected]
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>
> for more Biomass Cooking Stoves, News and Information see our web site:
> http://stoves.bioenergylists.org/
>
>
>
>
>
> --
> Paul A. Olivier PhD
> 26/5 Phu Dong Thien Vuong
> Dalat
> Vietnam
>
> Louisiana telephone: 1-337-447-4124 (rings Vietnam)
> Mobile: 090-694-1573 (in Vietnam)
> Skype address: Xpolivier
> http://www.esrla.com/
> _______________________________________________
> Stoves mailing list
>
> to Send a Message to the list, use the email address
> [email protected]
>
> to UNSUBSCRIBE or Change your List Settings use the web page
> http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
>
> for more Biomass Cooking Stoves, News and Information see our web site:
> http://stoves.bioenergylists.org/
>
_______________________________________________
Stoves mailing list
to Send a Message to the list, use the email address
[email protected]
to UNSUBSCRIBE or Change your List Settings use the web page
http://lists.bioenergylists.org/mailman/listinfo/stoves_lists.bioenergylists.org
for more Biomass Cooking Stoves, News and Information see our web site:
http://stoves.bioenergylists.org/
