P.S. Ask me why I bought Seagate. : -)
On Thu, Nov 20, 2014 at 2:41 AM, Christopher Bischoff <[email protected]> wrote: > By terminators I was referring to those 2mm grey things with two holes > used on that four pin doo-hicky by the drive connections, from what I > remember they changed the drive configuration. Shoot, jumper is the word I > wanted. Again, it has been several years, but one of the drives was pinned > out, and would not spin up until the jumper was removed. This may answer > Wil's question, one pinned, one not. Possibly they were RAID, I honestly > don't remember, do remember they had to be configured this way to work in > the G5, installed them both. Both Barracuda 7200s, 160Gb and 200Gb. No > chuKA noises, just a smooth warm up to a nice hum. > This is the adapter I have, which lights up sowing all connections are > good. I think. > > http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ > > Thanks guys, there is an iMovie project on one of these that I would > really like to salvage. > > On Wed, Nov 19, 2014 at 6:33 PM, TENEBRAE <[email protected]> > wrote: > >> Brand and model of the drives? >> >> Which adapter did you buy? They make a few models? >> >> These drives were not in a RAID configuration before, eh? >> -W >> >> Composed with thumbs. >> >> On Nov 19, 2014, at 14:38, Christopher Bischoff <[email protected]> >> wrote: >> >> I have two hds pulled from my G5 when in died about three years ago, they >> have been stored in a sort of safe manner. I bought a NewerTech adapter, >> and when attached, the drives spin up, but I can't get them to mount with >> Disk Utility or Disk Warrior. All terminators are off. Any other thoughts? >> TIA >> >> -- >> You received this message because you are subscribed to the Google Groups >> "StrataList-OT" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/stratalist-ot. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "StrataList-OT" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/stratalist-ot. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "StrataList-OT" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/stratalist-ot. For more options, visit https://groups.google.com/d/optout.
