No global setting. However via your Sun rep, you can sign a PRLA (Pre
Release License Agreement) that will give you early access to firmware
that will allow you to set the MTU in the firmware, just as you can with
a Tadpole Comet. Have your Sun rep contact the folks Sun Ray Marketing.
Ivar Janmaat wrote:
Hello,
Can anyone help us with the following case?
We have sunrays behind a vpn.
In order to get acceptable performance we need to set the mtu size to
something lower than 1500.
This can be done with dhcp option 26 on the dhcp server which provides
the sunray with an ip number.
But in some cases we have to use a dhcp server which we don't control
or the dhcp server on location does not have an interface to set this
option. We were wondering if we could inform the sunray server
directly about the mtu size it should use.
If the sunray is able to inform the sunray server about the correct
mtu size it should use, it might also be possible to inform the server
from another source. Does such a way exists? Or is there a global
setting we can use?
Help would be appreciated a lot.
Thanks,
Ivar
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
