How do I configure Firmware server? When I recently installed the v5.2 it upgraded to this buggy firmware without configuring a Firmware server.
I installed according to my earlier instructions and this was all I did: http://www.filibeto.org/pipermail/sunray-users/2011-June/017825.html I did no configuration of Firmware server, but still I could upgrade to the buggy firmware successfully. So, there is no need to configure a Firmware server? So what could be the problem? Is there no one out there besides me, that are using S11E? # ./utquery 192.168.1.2 terminalID=00144f946b02 terminalIPA=192.168.1.2 model=SunRayP8 currentAuth=192.168.1.3 currentFW=4.3_50_2011.04.22.22.07 currentBarrier=430 currentBarrierLevel=430 currentMTU=1500 currentLease=69350 Subnet=255.255.255.0 Router=192.168.1.1 MTU=1500 LeaseTim=85304 DHCPServer=192.168.1.1 INFORMServer=192.168.1.3 AuthSrvr=192.168.1.3 AuthPort=7009 LogHost=192.168.1.3 FwSrvr=192.168.1.3 NewTVer=4.3_50_2011.04.22.22.07 FWservType=FWSrvr speed=100F parmsVersion=4.3_50_2011.04.22.22.07 parmsBarrier=430 configMTU=1500 AltAuth=192.168.1.3 dnsList=192.168.1.1 confEnabled=1 confNetType=DHCP conf.kbcountry=26 kbcountry=26 stopqon=0 bandwidth=100000000 cmdcachesize=512 # ./utfwload -L Upgrading units to version 4.3_50_2011.04.22.22.07: ----- Original Message ---- From: Bob Doolittle <[email protected]> To: Kalle Anka <[email protected]> Cc: SunRay-Users mailing list <[email protected]> Sent: Sun, June 26, 2011 4:01:47 PM Subject: Re: [SunRay-Users] Fw: SRS 5.2 Performance Regression Fixed What does utquery IP say for one of these DTUs that is not upgrading? My guess is that your Firmware Server is not configured for them. -Bob On 06/26/11 06:27 AM, Kalle Anka wrote: > Right, it was late and my brain did not function. Now it works. Partly. I cd'ed > down to the newly downloaded install package and typed exactly as stated: > > # /opt/SUNWut/sbin/utfwadm -A -a -V -f >Components/10-SRSS/Patches/solaris/sparc/146928-01/SUNWutfw/reloc/SUNWut/lib/firmware >e > > CoronaP1 4.3_146928-01_2011.06.03.14.41<---- this is the new firmware!!! > :o) > SunRayP10 4.3_146928-01_2011.06.03.14.41 > CoronaP2 4.3_146928-01_2011.06.03.14.41 > CoronaP3 4.3_146928-01_2011.06.03.14.41 > CoronaP4 4.3_146928-01_2011.06.03.14.41 > CoronaP5 4.3_146928-01_2011.06.03.14.41 > CoronaP6 4.3_146928-01_2011.06.03.14.41 > CoronaP7 4.3_146928-01_2011.06.03.14.41 > SunRayP8 4.3_146928-01_2011.06.03.14.41 > SunRayP9 4.3_146928-01_2011.06.03.14.41 > > > > I reboot sunray 2 DTU, and I see the old firmware: > # /opt/SUNWut/sbin/utfwload > 11.0 gdm 192.168.1.2 P8.00144f946b02 4.3_50_2011.04.22.22.07 > > > > Ergo, there is no automatic upgrade of the SunRay2 DTU. So I try to force >update > of firmware by command: > # /opt/SUNWut/sbin/utfwsync > Stopping Authentication Managers on frasse ... > Will restart Authentication Managers in 50 seconds > Restarting Authentication Managers ... > > > > Still no success, it is the same old firmware. So I reboot the server, and do > utfwsync again. And still no success. It is the same old firmware. Then I tried > > # ./utfwadm -A -e 00144f946b02 > Unit "00144F946B02" will be upgraded at its next power-on > if it is served by host "frasse" and is connected to > the network and is not already running firmware > version "4.3_50_2011.04.22.22.07". > ### stopped DHCP daemon > ### started DHCP daemon > ### reinitialized DHCP daemon > > > > And still no success because it want to keep the same old firmware. So now >what? > But it feels like I am almost there. Soon... :o) > > > > > > > > > > > ----- Original Message ---- > From: Bob Doolittle<[email protected]> > To: SunRay-Users mailing list<[email protected]> > Cc: Kalle Anka<[email protected]> > Sent: Sat, June 25, 2011 11:42:02 PM > Subject: Re: [SunRay-Users] Fw: SRS 5.2 Performance Regression Fixed > > In this case it's easy, since the only update is new firmware. > > So just unpack the install image, cd to the top, and (assuming you're just >using > .parms files) do: > > /opt/SUNWut/sbin/utfwadm -A -a -V -f >Components/10-SRSS/Patches/solaris/sparc/146928-01/SUNWutfw/reloc/SUNWut/lib/firmware >e > > > If you have some more complex utadm configuration then you'll have to > extrapolate, but that's the path you want to the firmware. > > Note the path specifies "sparc", but it's irrelevant in this case. The firmware > doesn't depend on the server architecture, and is therefore identical for all > platforms. > > -Bob > > On 06/25/11 03:36 PM, Kalle Anka wrote: >> "It looks like 5.2.1 includes patch 146928-01. Solaris 11 Express doesn't use >> the S10 and older patch system and therefore the Sun Ray installer can't >> install >> the patch. You can probably find the patch embedded in the 5.2.1 download and >> manually copy the files into place and/or run the bundled action scripts. > I'll >> let someone else comment if they've actually tried installing 5.2.1 on S11e. >> William Yang" >> Ok, so does anyone has some pointers? How to do this on S11E? I am willing to >> experiment and post upgrade instructions here with some help from people. >> >> >> >> >> >> >> >> ----- Forwarded Message ---- >> From: Kalle Anka<[email protected]> >> To: [email protected] >> Sent: Sat, June 25, 2011 7:01:45 PM >> Subject: Fw: SRS 5.2 Performance Regression Fixed >> >> And, how are you supposed to upgrade to the newest v5.2.1? I tried to >> "utinstall" on my v5.2 but that did not work. There were error messages. >> >> >> >> >> >> >> ----- Forwarded Message ---- >> From: Kalle Anka<[email protected]> >> To: [email protected] >> Sent: Sat, June 25, 2011 6:49:29 PM >> Subject: Fw: SRS 5.2 Performance Regression Fixed >> >> I dont understand. I downloaded the SRS package anew and tried to update to >> newest version. I did as it says in the manual: "utsetup" but it did not work. >> There were some errors. So I backed to a fresh BE and reinstalled everything >> from scratch (gtar apache-tomcat etc etc etc). >> >> >> But now I can not upgrade the firmware. As Jenz Langner wrote: >> "after having installed that update I can report that the included firmware >> 4.3_146928-01_2011.06.03.14.41 indeed solves the slow screen update and >> stalling >> >> >> problem which was previously reported here. So everyone is suggested to > update >> their firmwares to that one. best regards, jens" >> >> But I have the same old firmware: "4.3_50_2011.04.22.22.07", the firmware has >> not been upgraded to the version that Jenz talks about above: >> "4.3_146928-01_2011.06.03.14.41". What can be wrong? See below: >> >> >> >> >> # utrelease >> Sun Ray Software 5.2.1 >> >> >> >> >> # utfwsync >> Stopping Authentication Managers on frasse ... >> Will restart Authentication Managers in 5 seconds >> Restarting Authentication Managers ... >> >> >> >> >> # utfwadm -A -e 00144f946b02 >> Unit "00144F946B02" will be upgraded at its next power-on >> if it is served by host "frasse" and is connected to >> the network and is not already running firmware >> version "4.3_50_2011.04.22.22.07". >> ### stopped DHCP daemon >> ### started DHCP daemon >> ### reinitialized DHCP daemon >> >> >> >> >> >> # ./utquery 192.168.1.2 >> terminalID=00144f946b02 >> terminalIPA=192.168.1.2 >> model=SunRayP8 >> currentAuth=192.168.1.3 >> currentFW=4.3_50_2011.04.22.22.07<------- this is old firmware! >> currentBarrier=430 >> currentBarrierLevel=430 >> currentMTU=1500 >> currentLease=56222 >> Subnet=255.255.255.0 >> Router=192.168.1.1 >> MTU=1500 >> LeaseTim=56278 >> DHCPServer=192.168.1.1 >> INFORMServer=192.168.1.3 >> AuthSrvr=192.168.1.3 >> AuthPort=7009 >> LogHost=192.168.1.3 >> FwSrvr=192.168.1.3 >> NewTVer=4.3_50_2011.04.22.22.07 >> FWservType=FWSrvr >> speed=100F >> parmsVersion=4.3_50_2011.04.22.22.07 >> parmsBarrier=430 >> configMTU=1500 >> AltAuth=192.168.1.3 >> dnsList=192.168.1.1 >> confEnabled=1 >> confNetType=DHCP >> conf.kbcountry=26 >> kbcountry=26 >> stopqon=0 >> bandwidth=100000000 >> cmdcachesize=512 >> _______________________________________________ >> SunRay-Users mailing list >> [email protected] >> http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
