Hi All, I am still contemplating my C600:
The case has a fan right behind the power supply, but there are two extra spaces for fans too. One is just below it where a blanking plate can be pushed out to accommodate a 60mm fan, where a power socket on the logic board marked "Fan" should be the one meant for feeding it. Just to the left of the power supply is a swing-out cage meant for another fan, and the case cover has vents for it, but I cannot find a suitable socket for feeding this fan though. As I am in Australia, summer temperatures can get very vicious, and for other Macs with more modest ventilation I had experienced hard drive lock-ups. So I sure hope that I am getting every angle covered from the start. If I can really max out ventilation, I presume the additional fan (or fans) should be pushing air out of the case? Thank you in advance! Best, Sam. -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
