Please try and upload this fix: http://www.pfsense.com/~sullrich/pfSense-1.0-RC3d-Full-Embedded.tgz to System -> Firmware.
In terms of the reboot and halt issues, this is generally ACPI related, make sure your BIOS is up to date and check out http://wiki.pfsense.com/wikka.php?wakka=BootOptions and http://wiki.pfsense.com/wikka.php?wakka=BootTroubleShooting Scott On 10/5/06, Roberto Greiner <[EMAIL PROTECTED]> wrote:
Hi, I'm getting a script error on the captive portal page. I'm making a test run with 1.0rc3, and in my test I added a 10 minutes "idle timeout" limit and a 30 minutes "Hard Timeout" (the small values are for the test run only!). When I pressed the save button, I got a blank page with the following line: Fatal error: Call to undefined function: getvolume() in /usr/local/captiveportal/radius_accounting.inc on line 164 Captive portal has the following other settings: * *Enable logaout popup window is enabled Radius Authentication (only primary server) send Radius Accounting packets Enable HTTPS login HTTPS server name is filled, certificate and key windows have the proper keys. A portal page is set All the rest is empty or not set. The machine is a 2.4 Xeon, with a 74GB Sata disk e 1GB RAM. Also, the "Halt" and "Reboot" options in the Diagnostics menus don't seem to be working. With the reboot command, I got the usual message "The system is rebooting now. This may take a minute." But after 5 minutes the system had not initiated the reboot and all the services where still operating normally. No reboot was done. With the "Halt" option, I got again the following message: Fatal error: Call to undefined function: getvolume() in /usr/local/captiveportal/radius_accounting.inc on line 164 When I tried to reboot the machine with a "/sbin/reboot" from the Diagnostics/Command screen, the webinterface and the server keyboard ceased to answer. I tried the Power button, and to my surprise the machine started a normal shutdown. So I couldn't verify if all functions where still working properly. To be sure, I tried to reboot again 5 minutes later, and the same thing happened. The halt command gave me the error message from above again. This time I tried /sbin/halt instead of reboot, but the same thing happened: The web interface stopped working, the machine keyboard too, and pressing the power button made the machine start a shutdown. Besides that, another service that is giving me the same "Call to undefined function" error message as above is trying to disconnect a user through the Status/Captive Portal screen. I get the message and the user is not disconnected. Roberto -- ------------------------------------------------------------------- | Marcos Roberto Greiner | | | | Os otimistas acham que estamos no melhor dos mundos | | Os pessimistas tem medo de que isto seja verdade | | Murphy | ------------------------------------------------------------------- | [EMAIL PROTECTED] | ------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
