Chris, So I got the firewall installed on the hard drive, inserted into the Soekris board and I'm able to see the boot up from the serial console. I thought everything was good but then it got to the mount part and was not able to mount root (Trying to mount root from ufs:/dev/ad4s1a). I had to manually enter in ufs:ad1s1a (Note, it's ad1, not ad4) to get it to boot. It seems it's trying to mount root from the wrong place and I must manually enter in the mount command to get it to go. Once I do that it boots up fine and the firewall works. How do I get the firewall to automatically mount the correct drive?
Christopher Iarocci -----Original Message----- From: Chris Buechler [mailto:[EMAIL PROTECTED] Sent: Thursday, December 20, 2007 12:51 AM To: [email protected] Subject: Re: [pfSense Support] Setting up on Soekris NET5501-70 with all features Christopher Iarocci wrote: > > Sean, > > > > Will the ISO allow me to install to a hard drive hung off a machine by > a USB adapter, or will it only work if the hard drive is connected to > the motherboard? I imagine I have to boot a machine off the CD > created by the ISO and that will run me through an install to hard drive. > Yes to both, USB adapters work fine for install and operation, and you'll need to run the installer off the live CD (option 99). --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.17.4/1189 - Release Date: 12/18/2007 9:40 PM --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
