Alex, I share your pain. I'm not a pf guru, but I can't seem to get this working either...
I have managed to get the Load Balancer Status to turn Green/Yellow/Red as expected when I unplug a connection. But the internet get's all wonky... as if DNS isn't working, old records seem to work, some pages take forever, etc... I have a similar setup to you it looks like. I was suspect that it doesn't like 192. series as a gateway and that there is some filtering in the default rules. I have removed all default filtering for these IPs (since my test environment has a WAN connected to a real internet connection / router (200.x) and the second WAN is to an internal router (192.x), that then goes to the internet), internal LAN is 192.168.1.x. I wonder if the issue I am having is that the WAN's are load balancing, part traffic goes across one, part the other... when one goes down, it get's screwy... not failing over... Like you, I don't want to use TWO WANS at the same time, I just want one to work, or the other... and on recovery revert back to the primary. Does anyone have a solution to this? Let me know if you make any progress, I am about to call it a night. Regards, Chuck From: Alexsander Loula [mailto:[email protected]] Sent: March-23-09 9:00 PM To: [email protected] Subject: Re: [pfSense Support] Multi-WAN with Fail Over No, I have two completely different gateways. One is 200.XXX.XXX.XXX and the other is 192.XXX.XXX.XXX. 2009/3/23 Chris Buechler <[email protected]<mailto:[email protected]>> On Mon, Mar 23, 2009 at 11:04 AM, Alexsander Loula <[email protected]<mailto:[email protected]>> wrote: > This is my current setup: > > I'm not using CARP, only the Load Balance service (pools). > Are the gateways the same? If so, that won't work as it balances by gateway IP, you need an intermediate NAT device on one. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected]<mailto:[email protected]> For additional commands, e-mail: [email protected]<mailto:[email protected]> Commercial support available - https://portal.pfsense.org
