Hi Andy, In case you still haven't been able to make Arachne work I have prepared autoexec.bat and config.sys files which should make your computer have enough free ram. My autoexec.bat and config.sys are a modified version of Charles Angelich's excellent startup files located in his website:
http://www.undercoverdesign.com/ dosghost/dos/drdoscfg.asp CONFIG.SYS ******************** DEVICE=C:\DRDOS\EMM386.EXE DPMI=OFF FRAME=NONE DOS=HIGH,UMB SHELL=C:\COMMAND.COM C:\ /E:1024 /P LASTDRIVE=F BUFFERS=20 FILES=20 FCBS=5,0 STACKS=9,256 LASTDRIVE=Z DEVICEHIGH=C:\utilitie\DIAMOND\CDSETUP.SYS /T:I /P:170 /I:15 DEVICEHIGH=C:\utilitie\DIAMOND\TOSHIBA.SYS /D:DMSCD01 AUTOEXEC.BAT ****************** PROMPT $p$g KEYB GR- VERIFY OFF BREAK ON SET DRDOSCFG=C:\DRDOS LH C:\DRDOS\CTMOUSE /2 LH SHSUCDX /D:%cdrom% /M:10 LH C:\ZIPTOOLS\GUEST.EXE LH NWCACHE 256 64 /LEND=ON /DELAY=OFF A:- LH C:\utilitie\DIAMOND\MSCDEX.EXE /D:DMSCD01 /M:12 LH C:\utilitie\DIAMOND\SNDINIT.EXE /b SET BLASTER=A220 I7 D1 T4 PATH C:\DRDOS;C:\NWCLIENT;C:\WINDOWS;C:\DOS;C:\internet\TWSK20; C:\utilitie\DIAMOND;C:\EMM386;C:\ Simply rename your old autoexec.bat and config.sys and copy these settings to new files. I have added the necessary lines so that your zipdrive will load as well as the CDROM. I am 99% sure that you will be able to load arachne from the zip drive. If it doesn't work e-mail me back. Good luck Inigo __________________________________________________ Do you Yahoo!? U2 on LAUNCH - Exclusive greatest hits videos http://launch.yahoo.com/u2 To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with unsubscribe SURVPC in the body of the message. Also, trim this footer from any quoted replies. More info can be found at; http://www.softcon.com/archives/SURVPC.html
