What is this 4573 eNB code people are referring to? I was half-expecting a fall maintenance release to 6.6 like we had with 6.5 last year; is this a prerelease version of that?
We did have a truly bizarre problem with subframe profile 1, at least with eNB 2616. It performed great most of the time, but then randomly, specific CPEs would show a total dive in available throughput and start taking massive packet loss for no apparent reason. This happened across many CPEs spread out over many eNBs. Rebooting either the CPE or eNB would not necessarily clear it up, and it wouldn't target all CPEs on a given eNB (total eNB throughput wasn't taking a dive, just throughput to one CPE in particular). Switching back to subframe profile 2 cleared that issue right up. Haven't revisited it since the 6.6 release. At the time, Telrad just told us "if subframe 2 works better for you, then use that." :-/ Am tempted to try it again, since I really would like to see more capacity allocated to the upload. -- Nathan From: [email protected] [mailto:[email protected]] On Behalf Of Bryce Duchcherer Sent: Tuesday, November 15, 2016 6:51 PM To: [email protected] Subject: Re: [Telrad] Issues 1) Both upload and download speeds suck and very sporadic. Subframe config 2 has very limited upload capacity, subframe 1 doubles that. 2) On the 7000's we see the VPLS tunnel drop constantly (once every day or 2). Rebooting the UE sometimes helps, sometimes you have to hold your tongue the right way, balance on one foot and pat your head and it might work. Sometimes just get pissed off and walk away and it starts working. 3) Haven't noticed issues with this yet. All UE's are installed with a CINR above 10 with chains within 2db difference. EPC 0606.00729 eNB 0606.04573 UE mixed between .089 and .105 Bryce Duchcherer NETAGO From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Dan Petermann Sent: Tuesday, November 15, 2016 15:50 To: [email protected]<mailto:[email protected]> Subject: [Telrad] Issues We are seeing the following issues with our Telrad Gear. Is anybody else seeing the same/similar issues? 1) Issues with slower than expected upload speeds. Packet loss to SM's. Download speeds slower than expected. 2) VPLS customers losing their capability to pass data until the EPC is rebooted. During the same timeframe access to the UE is fine. 3) Issues with VPN connections through VPLS setups.
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
