Well, I am not sure I understand your problem correctly. It is not possible to combine scraps in elevation projection with different projection angles, but I am not sure, whether you are trying to do this. If you could send me some stripped source codes, I can have a look, where the problem is.
Thanks, S. On 21 March 2011 14:59, Footleg <drfootleg at gmail.com> wrote: > I've tried searching the wiki and Therion book to find an answer to this, > but it does not seem to feature anywhere. Not even in any examples I can > find. I am trying to draw a simple cave with a 20m vertical entrance shaft, > and a couple of chambers down a slope at the bottom. I've drawn an elevation > scrap for one of these chambers and the shaft. But when I generate an > elevation map using this scrap the shaft looks fine, but the chamber wall is > a mess. So I concluded it is not projecting the elevation along the bearing > I would like. The Therion book showed me I can put a bearing on the scrap > type. So I tried elevation 90. Now my shaft is no longer appearing anywhere > near vertical in the elevation PDF and the chamber. Can anyone help me > please? > > Screenshot of scrap, and pdfs with default elevation map and elevation 90 > settings attached. > > Footleg > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20110321/9bb4347b/attachment.html>
