Thanks Matt. Undocked, as per the update instructions. (Not that I had a dock anyway).
On 10/9/2010 9:50 PM, Matt wrote:
Did you run these updates while docked or undocked? Curious.. ----- Original Message ----- From: Ted Wiseman To: Thinkpad Mailing List Sent: Saturday, October 09, 2010 11:40 PM Subject: Re: [Thinkpad] T43 - updating embedded controller Update: As I expected, there was no response to the F3 key either. But this is strange - holding down the power button doesn't force shutdown. Is removing the A/C and battery the only way to power off? > I ran System Update on a T43 and chose some of the optional updates > available, among them updating the embedded controller. When System > Update was ready to install the embedded controller, it gave the usual > warning to close all open programs, which I did, and that the system > would power off and then restart, which it did. When the installer > opened, I selected #1 - Read This, and then #2 - to begin the update. At > that point the fan started up and a window appeared showing: > > Now updating > System will turn off when finished. > It may take about 30 seconds > Do not to turn off the computer during the update. > > The only problem is that the system never turned off, even after 30 > minutes. That screen is still up, and doesn't respond to the Enter, Esc > or F1 keys. The only other key option is F3=Exit. > > Has anyone had the EC update either freeze during installation or fail > to install? What's likely to happen if I force shutdown? _______________________________________________ Thinkpad mailing list [email protected] http://stderr.org/cgi-bin/mailman/listinfo/thinkpad _______________________________________________ Thinkpad mailing list [email protected] http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
_______________________________________________ Thinkpad mailing list [email protected] http://stderr.org/cgi-bin/mailman/listinfo/thinkpad
