There are potential failure issues with the TBolt and the monitor. Have you tried the TBolt with a computer?
I had a TBolt die but would still put out 10 MHz. No serial data and no PPS though. Have you looked to see if there is 10 MHz and a PPS? If the issue is the TBolt, make sure the voltages and ground applied to the connector are actually getting to the board. Good luck, Joe -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of bill Sent: Wednesday, April 13, 2011 11:13 AM To: time-nuts Subject: [time-nuts] Thunderbolt serial port problem I have a problem with the data out of the thunderbolt serial port. I was monitoring with ko4bb monitor and the thunderbolt quit sending data. I seem to remember some discussion of this on the list some time ago. I did a search but didn't find anything. Any suggestion ? Otherwise I will reverse engineer the serial port and trouble shoot. Bill K7NOM _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1209 / Virus Database: 1500/3571 - Release Date: 04/13/11 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
