On 4/13/2011 9:13 AM, bill wrote:
I have a problem with the data out of the thunderbolt serial port. I
was monitoring with
ko4bb monitor and the thunderbolt quit sending data.
I seem to remember some discussion of this on the list some time ago.
I did a
search but didn't find anything.
Any suggestion ? Otherwise I will reverse engineer the serial port and
trouble shoot.
Bill K7NOM
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I made a bad test. The serial cable was not connected to the computer.
Actually the problem
is the monitor. I bought from flukel (sp) in China. I opened up the
monitor and re-soldered
some questionable solder joints and it still doesn't work. The monitor
reports "Waiting for
GPS" and "No Message"
I think will easier to get a new one instead of fooling with this one :-)
Sorry about the bad test
Bill K7NOM
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
