Hi I do not believe FE owns Morion. The most certainly own space in the Morion factory. Last time I was there I saw the space.
Bob On Jun 8, 2012, at 9:00 PM, Arthur Dent wrote: > I just got an DOXCO made by Frequency Electronics, Inc., so the first thing > I did was remove the screws from the outer cover to open it up and check > out the insides. Once I removed the foam so I could see the oven, I had the > feeling of deja vu. but I'd never owned one of these units before. I realized > that it was exactly the same as the oven inside a Morion MV89A that I've > seen on this list and where FEI apparently owns Morion it wasn't too much > of a surprise. The OXCO part number is FE-489A which is pretty close > to the Morion MV89A part number as well. Attached is a photo of the FE > on the left and the photo of the Morion from this list on the right. > > http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A89A1024.jpg > > Here is a view of the entire board which has a DB-9 connector to connect > to the outside world. In the foreground is the output which converts the 5Mhz > output of the oscillator to 15Mhz that goes to the SMA connector. The size > of this OXCO is exactly the same as the 5650A rubidium oscillator by FEI. > Adjustment may be digital and/or analog. > . > http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A606-1.jpg > > -Arthur > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
