Hi Yakov is a pretty good guy. I doubt he would ever sell the whole company to FEI. I believe there is still a Russian government provision in his charter that effectively keeps 51% of the ownership Russian.
Bob On Jun 9, 2012, at 7:25 AM, Azelio Boriani wrote: > I have seen that FEI invested an 36% in 2004 and then reduced the > investment in 2007... > The Morion president Dr. Yakov Vorokhovsky visited my company one year ago, > we were buying the MV189 OCXO. > > On Sat, Jun 9, 2012 at 11:37 AM, Rob Kimberley > <[email protected]>wrote: > >> Bob, >> >> FEI as far as I know do own Morion. That's certainly what I was told when I >> worked for Zyfer (also owned by FEI). >> >> Rob K >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Bob Camp >> Sent: 09 June 2012 02:15 >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] Morion MV89A pics >> >> Hi >> >> I do not believe FE owns Morion. The most certainly own space in the Morion >> factory. Last time I was there I saw the space. >> >> Bob >> >> On Jun 8, 2012, at 9:00 PM, Arthur Dent wrote: >> >>> I just got an DOXCO made by Frequency Electronics, Inc., so the first >>> thing I did was remove the screws from the outer cover to open it up >>> and check out the insides. Once I removed the foam so I could see the >>> oven, I had the feeling of deja vu. but I'd never owned one of these >>> units before. I realized that it was exactly the same as the oven >>> inside a Morion MV89A that I've seen on this list and where FEI >>> apparently owns Morion it wasn't too much of a surprise. The OXCO part >>> number is FE-489A which is pretty close to the Morion MV89A part >>> number as well. Attached is a photo of the FE on the left and the photo >> of >> the Morion from this list on the right. >>> >>> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A89A1024.jpg >>> >>> Here is a view of the entire board which has a DB-9 connector to >>> connect to the outside world. In the foreground is the output which >>> converts the 5Mhz output of the oscillator to 15Mhz that goes to the >>> SMA connector. The size of this OXCO is exactly the same as the 5650A >> rubidium oscillator by FEI. >>> Adjustment may be digital and/or analog. >>> . >>> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A606-1.jpg >>> >>> -Arthur >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
