Bob, FEI as far as I know do own Morion. That's certainly what I was told when I worked for Zyfer (also owned by FEI).
Rob K -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob Camp Sent: 09 June 2012 02:15 To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Morion MV89A pics Hi I do not believe FE owns Morion. The most certainly own space in the Morion factory. Last time I was there I saw the space. Bob On Jun 8, 2012, at 9:00 PM, Arthur Dent wrote: > I just got an DOXCO made by Frequency Electronics, Inc., so the first > thing I did was remove the screws from the outer cover to open it up > and check out the insides. Once I removed the foam so I could see the > oven, I had the feeling of deja vu. but I'd never owned one of these > units before. I realized that it was exactly the same as the oven > inside a Morion MV89A that I've seen on this list and where FEI > apparently owns Morion it wasn't too much of a surprise. The OXCO part > number is FE-489A which is pretty close to the Morion MV89A part > number as well. Attached is a photo of the FE on the left and the photo of the Morion from this list on the right. > > http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A89A1024.jpg > > Here is a view of the entire board which has a DB-9 connector to > connect to the outside world. In the foreground is the output which > converts the 5Mhz output of the oscillator to 15Mhz that goes to the > SMA connector. The size of this OXCO is exactly the same as the 5650A rubidium oscillator by FEI. > Adjustment may be digital and/or analog. > . > http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A606-1.jpg > > -Arthur > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.