Hi They certainly own a "co-production facility" located inside the Morion factory in St. Petersburg. It's a *big* 1930's era building with lots of space.
Bob On Jun 9, 2012, at 5:37 AM, Rob Kimberley wrote: > Bob, > > FEI as far as I know do own Morion. That's certainly what I was told when I > worked for Zyfer (also owned by FEI). > > Rob K > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Bob Camp > Sent: 09 June 2012 02:15 > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Morion MV89A pics > > Hi > > I do not believe FE owns Morion. The most certainly own space in the Morion > factory. Last time I was there I saw the space. > > Bob > > On Jun 8, 2012, at 9:00 PM, Arthur Dent wrote: > >> I just got an DOXCO made by Frequency Electronics, Inc., so the first >> thing I did was remove the screws from the outer cover to open it up >> and check out the insides. Once I removed the foam so I could see the >> oven, I had the feeling of deja vu. but I'd never owned one of these >> units before. I realized that it was exactly the same as the oven >> inside a Morion MV89A that I've seen on this list and where FEI >> apparently owns Morion it wasn't too much of a surprise. The OXCO part >> number is FE-489A which is pretty close to the Morion MV89A part >> number as well. Attached is a photo of the FE on the left and the photo of > the Morion from this list on the right. >> >> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A89A1024.jpg >> >> Here is a view of the entire board which has a DB-9 connector to >> connect to the outside world. In the foreground is the output which >> converts the 5Mhz output of the oscillator to 15Mhz that goes to the >> SMA connector. The size of this OXCO is exactly the same as the 5650A > rubidium oscillator by FEI. >> Adjustment may be digital and/or analog. >> . >> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A606-1.jpg >> >> -Arthur >> _______________________________________________ >> time-nuts mailing list -- [email protected] To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
