On 05/10/2013 10:16 PM, Magnus Danielson wrote:
Hi Tom,
On 05/10/2013 08:02 PM, Tom Knox wrote:
Has anyone used Time Lab with The current Fluke PM6690, Spectracom
CNT90/91?
Thanks;
CNT90 (aka PM6690) did not use to work with TimeLab, as CNT90 does not
to talk-only, which is the normal requirement for TimeLab generic
counter support.
I don't remember if I managed to get it operating or not, but I could
take it for a test-spin if you like. The CNT-80 driver should work
thought, as it builds on the SCPI commandset.
OK. At least the version of TimeLab that I had on the first laptop I
grabbed where unable to get useful data from the CNT-90.
When running in "Native" mode, all I get out of it is the identity
string. Measurement chokes on the identity string.
When running in "Compatible" mode, I did get the HP53131A driver get the
identity string and then bogus values, but getting measurement chokes on
the identity string and then dieas.
If someone could put a CNT-90 in John hands, I'm sure that he can make
it talk sense based on the CNT-80 driver. The manuals (including
Programmers manual) is available from Flukes online.
CNT-90 does not have talk-only mode. It's a design choice I know they made.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
