I just bought a PM6690/AN (CNT-90) and my inexperience led to quite a roundabout path to getting it to work with either the Agilent 82357b or Prologix GPIB-USB interfaces (using Agilent IO Suite 16.3 or NI Max). However, once I figured out the PM6690 front panel GPIB setup, Timelab worked quite well using the PM6680 driver option, So far it seems to be capturing and plotting data quite well though I have not yet used all of the Timelab functions.
Jerry K1JOS -----Original Message----- From: Magnus Danielson [mailto:[email protected]] Sent: Friday, May 10, 2013 16:17 To: [email protected] Subject: Re: [time-nuts] TimeLab PM6690 CNT9X? Hi Tom, On 05/10/2013 08:02 PM, Tom Knox wrote: > Has anyone used Time Lab with The current Fluke PM6690, Spectracom CNT90/91? > Thanks; CNT90 (aka PM6690) did not use to work with TimeLab, as CNT90 does not to talk-only, which is the normal requirement for TimeLab generic counter support. I don't remember if I managed to get it operating or not, but I could take it for a test-spin if you like. The CNT-80 driver should work thought, as it builds on the SCPI commandset. Cheers, Magnus _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
