Yes, Native mode and it works fine with either the Prologix or Agilent GPIB-USB. For Prologix USB Timelabs has special check box that needs to ticked off.
Jerry -----Original Message----- From: Magnus Danielson [mailto:[email protected]] Sent: Sunday, May 12, 2013 09:56 To: [email protected] Subject: Re: [time-nuts] TimeLab PM6690 CNT9X? On 12/05/13 02:15, Jerry wrote: > I just bought a PM6690/AN (CNT-90) and my inexperience led to quite a > roundabout path to getting it to work with either the Agilent 82357b > or Prologix GPIB-USB interfaces (using Agilent IO Suite 16.3 or NI Max). > However, once I figured out the PM6690 front panel GPIB setup, Timelab > worked quite well using the PM6680 driver option, So far it seems to > be capturing and plotting data quite well though I have not yet used > all of the Timelab functions. OK. I will have to upgrade to the beta and test again. I assume you used the Native mode. Cheers, Magnus _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
