Thanks for all replies so far! It looks like I will play around with the evaluation board some more, and see if I can get the on-chip PLL to behave better. The settings with 2x edge-detector and 60x PLL were the only ones I could find where the output frequency setting in the software corresponded to the actual output frequency - hence I tested only with 10MHz x120 = 1200 MHz sysclock. I have asked about this on the AD forum, but no replies yet.
If that doesn't work the suggested ADF4351 (or similar) evaluation board looks like the most straightforward option. thanks, Anders _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.