One method is to have the event trigger sampling of a pair of quadrature phase sinewaves. eg LT1407A-1 dual 14 bit SAR ADC can sample a quadrature pair of 10MHz sine waves with ~ 5ps resolution in the computed phase. Bruce
On Wednesday, 4 May 2016 10:00 PM, Attila Kinali <att...@kinali.ch> wrote: On Tue, 3 May 2016 22:31:14 +0200 Magnus Danielson <mag...@rubidium.dyndns.org> wrote: > An alternative to the edge estimator method is to continuously sample, > mix with a reference frequency, decimate and then do arc-tangent of the > I/Q samples. This is what is used for phase-noise measurement such as > the Symmetricom/Microsemi test-kits, TimePod, and also the new R&S > phase-noise system. The "signal" is not a sinusoid, but discrete events. Think of it as incomming pulses and you want to measure their arrival time. Attila Kinali -- Reading can seriously damage your ignorance. -- unknown _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.