Yep!! Count me in for a few also!! maybe 4 or 5...
Dave M
Wes wrote:
I'm not up to doing the whole project, but I would certain be
interested in 2 or 3 boards for sure.
Wes Stewart N7WS
On 10/26/2018 5:51 AM, Bob Martin wrote:
Bert,
That looks like a useful board. Certainly some of the oscillators
I'm giving away would fit nicely on it. Since it looks like a two
layer board, a quick check at pcbway.com puts the cost at $.79
apiece at the 100 quantity exclusive of shipping.
Best,
Bob Martin
On 10/26/2018 4:17 AM, ew via time-nuts wrote:
There recently was a request for an OCXO board. I did a layout, see
attached and had Corby do his usual QC test.
If some one is interested to make boards and maybe sell to other
time nuts please contact me off list and I will get you code and
possible suppliers.
Board does not have an amp but could be added, if so, please
advise, what should be added. Regardless what the direct output
will remain
Bert Kehren
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
